|
|
 |
|
|
 |
| |
|
control
panel
instructions |
|
menu
map
(common
functions) |
|
|
|
|
|
|
|
|
|
Actual test using
AVIVA on used/empty
HP toner cartridge
Q2610: |
| |
|
1. |
Using the
Laserjet
2300
printer, an
empty HP
Q2610
cartridge is
installed to
run a demo
page
printout.
The printout
is blurred.
(Fig.1.) |
|
2. |
The
cartridge is
dismantled
and only the
magroller
removed. |
|
3. |
Magroller is
applied as
per
directions
above. |
|
4. |
Magroller is
refitted
into the
toner
hopper. |
|
5. |
Demo page
test is
conducted
again. |
|
6. |
Almost
immediately
the printout
becomes
darker, more
even. |
|
7. |
Printing of
configuration
pages
continues.
(Fig.2) |
|
8. |
Progressively,
prints
become
darker and
darker until
they reach
optimum
density -
identical to
the printout
of a brand
new HP toner
cartridge. |
|
This test demonstrates the
effectiveness of AVIVA.
Where normally an empty HP
toner cartridge will print
lighter, is actually printed
darker after the magroller
was coated. The same printer
was used to print the demo
page and menu map page.
Conclusion
The printout is clear and
clean without a speckle of
toner. Where the print has a
marginal blast before the
coating was done, the
marginal blasting becomes
even more marginal. There is
absolutely no backgrounding.
AVIVA works effectively on
all HP components as well as
on all toner/drum systems,
enhancing density and
optimizing performance. |
|
| |
|
|
|
